The carcass of a solid tire is solid. No cords are used as a skeleton, no need to inflate, so no inner tube or inner liner is needed. Early tires were solid tires. Solid tires are generally used under high loads, and the rubber is required to have sufficient pressure resistance and wear resistance, high enough tensile stress, high hardness, low deformation and good wear resistance.
Solid tires are industrial tires that are suitable for running vehicles under harsh conditions of low speed and high load. Its safety, durability, and economy are significantly better than pneumatic tires. It is widely used in various industrial vehicles, military vehicles, and construction machinery. , Port and airport towed vehicles and other fields.
Solid tires often need to be transported during the production process. Since the solid tires used by large vehicles are very heavy and cannot be transported by humans, they are generally transported by machinery. In order to prevent damage to the surface of the tires, hooks or chains cannot be used for transport. Handling. At present, many factories use forklifts for handling, which is slow in handling efficiency and high in cost.
When using solid tire transportation aids for transportation, the machine is controlled to move to a designated position through the operation button and the operation gear lever in the control box, and then the turntable is controlled to rotate and the length adjustment motor starts to drive the crossbar forward and backward Move the fixed disc to reach the top of the tire to be transported. Adjust the position of the suction cup by adjusting the length of the piston rod of the cylinder to make it reach above the smooth surface of the tire tread. The hydraulic support rod shrinks to make the suction cup descend and absorb On the tire surface, the hydraulic support rod then stretches to suck up the tire and place it in a designated place.